ATR-FTIR光谱技术在聚合物膜研究中的应用

红外光谱是聚合物研究中常用的一种表征手段，而衰减全反射红外光谱（ATR-FTIR）更是由于在研究聚合物薄膜方面具有显著的优势而被广泛使用。逐层组装（layer-by-layer Assembly）技术是一种常用的组装聚合物超薄膜的方法，ATR-FTIR光谱技术的引入可以在获取膜组装过程中相应信息的同时有效地避免表征过程中对样品的损害。另一方面，ATR-FTIR方法与二维相关光谱技术（two-dimensional correlation spectroscopy, 2D correlation spectroscopy）相结合也是研究小分子（主要是水分子）在聚合物薄膜中的渗透行为的有效手段。本文对ATR-FTIR的基本原理和显著特点作了介绍，并以实例阐述该方法在逐层组装技术和水分子在薄膜内渗透行为研究两方面的应用。     

Stereoselective synthesis of cis-p-menth-8-ene-1,7-diol, cis-p-menthane-1,7-diol, and cis-p-menthane-1,7,8-triol

The natural products cis-p-menthane-1,7-diol (cis-IV), cis-p-menth-8-ene-1,7-diol (cis-I) and cis-p-menthane-1,7,8-triol (cis-II) are obtained starting from the corresponding cis-cyanohydrins, cis-2 and cis-7, respectively, by chemical transformation of the cyano into the hydroxymethyl group. The key step of the synthesis is the very high cis-selectivity (> or = 96 %) of the MeHNL-catalyzed HCN addition to 4-alkylcyclohexanones. From 4-isopropylcyclohexanone (1) the cyanohydrin cis-2 and from 4-(1-methylvinyl)cyclohexanone (6) the cyanohydrin cis-7 result almost quantitatively. Regioselective hydroxylation of cis-I affords the triol cis-II. X-ray crystal structure determinations of the final products confirm their cis-configuration.     

XPS,AFM, ATR and TPD evidence for terraced,dihydrogen terminated, 1×1 (100) silicon

Heating (100) silicon at high temperature (say, higher than 850 °C) in H₂, cooling to 670–700 °C in the same ambient, and quenching to room temperature in N₂ results in environmentally robust, terraced 1 × 1 (100) SiH₂. Evidence for this conclusion is based on angle‐resolved x‐ray photoelectron spectroscopy, atomic force microscopy, infrared absorption spectroscopy in the attenuated total reflection mode, thermal programmed desorption, and reflection high‐energy electron diffraction. Copyright © 2005 John Wiley & Sons, Ltd.     

高温氧化-化学发光检测法测定水中总氮

采用高温氧化-化学发光检测法（high temperature oxidation ＆ chemiluminescence, HTO-CL）进行水质总氮（TN）的在线测定。总氮浓度（CN）与化学发光的强度（IN）呈良好的线性关系，线性区间为0．05～100mg／L。对真实水样采用本方法进行测定，其结果与国标方法相符，回收率在90％～110％之间。以本方法为工作原理的TN-2000型总氮测定仪可用于地表水质及污水的在线监测。     

Comparison of chemical properties of food products processed by conventional and ohmic heating

The effect of ohmic and conventional heat processing of different food products on their chemical and physical parameters was studied. Depending on the food being analysed, parameters such as pH, total solids, ash, titratable acidity, ascorbic acid, total sugars, total fatty acids, total phenolic compounds, and anthocyanins content were determined before and after ohmic and conventional pasteurization techniques and the results were compared using one-way analysis of variance. In goat milk samples treated by ohmic technology the pH value (6.58) and total fatty acids content in milk fat (86.5 mass %) were comparable to those found in milk treated by conventional process, however, ohmically treated samples presented a lower content of lactic acid, 0.13 %. In cloudberry jam samples treated by ohmic technology the results of some of the main parameters tested, such as total sugar content 46.1 mass %, ascorbic acid content 2.83 mass %, and titratable acidity 6.01 mass % (as citric acid) did not show significant differences when compared with samples treated by conventional technology. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Dependence of the rate constants on the treatment of internal rotation modes: the reaction OH + CH3SH --> CH3S + H2O as an example

The title reaction has been used as an example to test the importance of using a hindered rotor treatment instead of a harmonic oscillator model for calculating vibrational partition functions corresponding to low-frequency internal rotation modes. First, a normal-mode analysis according to the Ayala and Schlegel's algorithm has been used to identify the internal rotation modes of methanethiol and the transition state structure. Then, after calculation of the energy barrier for each internal rotation, the corresponding hindered rotor partition functions have been calculated following the CW scheme of Chuang and Truhlar. The results show that the anharmonic treatment produces a rather modest improvement of the rate constants at room temperature or below.     

Metabolomic-based investigation of Yinlan alleviating hyperlipidemia by inhibiting blood stasis and phlegm turbidity through the PXR-CYP3A4-ABCB1-FXR pathway

Yinlan lipid regulatory capsule (YL) is a composite traditional Chinese medicine (TCM) new drug to alleviate hyperlipidemia, while its therapeutic mechanism in vivo was not clarified with nontargeted metabolomics investigation. An animal model was established in rats fed a high-fat diet, and their body weights, body mass index (BMI) and blood cholesterol levels were measured. Serum, liver and kidney tissue samples were also extracted for PXR-CYP3A4-ABCB1-FXR signaling pathway research using PCR and UHPLC–MS. The obtained plasma samples were analyzed by UHPLC-Q-TOF-MS metabolomic investigation, which revealed PXR-CYP3A4-related metabolites and changes induced by YL. Finally, the key metabolites were chosen as index components, and their levels in the serum, liver, small intestine and bile were used for simultaneous UHPLC–MS-MS determination. The results indicated that YL was effective in rebalancing blood TG and TC levels (compared to controls). With respect to the PXR-CYP3A4-ABCB1 pathway, as a result of YL’s effect, gene expression or activity of the two targets decreased significantly in both the liver and kidney. The same trend was observed in the serum samples mentioned above. Metabolomics screening and data revealed that 44 metabolites can be regarded as biomarkers related to hyperlipidemia, fatty acids synthesis, and body energy consumption, as well as synthesis, transportation and exertion of cholesterol. YL’s treatment focused on 26 of them, primarily bile acids, indicating that the antihyperlipidemic effect of this drug lies in its inhibitory activity of cholesterol metabolism. Subsequent analysis of those in vivo components revealed that significant increases (compared to the model group) occurred in the blood, liver, small intestine and bile in groups that received medium and high doses of YL (while the low dose was relatively unchanged). Those target components exhibit a close relationship with PXR and/or CYP3A4. The use of YL repressed PXR expression and subsequently decreased CYP3A4 activity. As a result, synthesis of related bile acids increased, while cholesterol levels decreased, consequently leading to the attenuation of hyperlipidemia. This study comprehensively investigated the antihyperlipidemia mechanism of YL based on its repression of PXR-CYP3A4 activity and related metabolite yield, establishing an accurate method for evaluating the therapeutic effect of YL.     

Double hexagonal chains with minimal total <Emphasis Type="Italic">π</Emphasis>-electron energy

The total energy of all π-electrons in a conjugated hydrocarbon (within the framework of HMO approximation) is the sum of the absolute value of all the eigenvalues of its corresponding graph. In this paper, we consider “double hexagonal chains” as benzenoids constructed by successive fusions of successive naphthalenes along a zig–zag sequence of triples of edges as appear on opposite sides of each naphthalene unit. It is shown that if the fusions are such as to give a polyaceacene then the total π-electron energy is the minimum from among all the double hexagonal chains with the same number of naphthalene units.      

反向流动注射化学发光法测定痕量铁

基于邻菲别名林对高碘酸钾－碱性鲁米诺－铁体系发光强度的增敏作用建立了水体中总铁的反向流动性化学发光检测方法。该法线性范围在１×１０＾－４－１０ｍｇ／Ｌ，检测限为３×１０＾－６ｍｇ／Ｌ，对于５×１０＾－３ｍｇ／Ｌ Ｆｅ测定９次的相对标准偏差为０．９％。此方法已用在水处理中总铁的监测。